Set as homepageCollectors site

vstarcam

 Retrieve Password
 Register
12
Return to forum Add thread
Author: barkas

Backup Super Client PNP

[Copy URL]

4

!threads!

0

Friends

0

Money

Newbie

Rank: 1

ztw2017 Post time 2017-7-26 10:58:26 |Show all posts
This is a high voltage version Gecko ESC supports up to 12S LiPo, but no built in BEC.

This is a high-quality, efficient brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. GECKO series also include ESC OPTO for giant flying. This series of ESCs also features an exposed, finned heat sink aluminum case with lightweight plastic end caps. Additional features include safe power arming along with advanced programmable, data logging system, low voltage cutoff, braking, timing, throttle input range, and more, making this series truly a pro series speed control.

As the development of the electronic and popular demand of the market, our BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher current applications to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

Features
Data logging system such as temperature, voltage, current, RPM,
SBEC Voltage Output 5.0, 6.0, 7.4, 8.4V adjustable
Advanced Governor Mode and soft start
High SBEC Current Output, continuous 8A and burst 16A, designed to meet your high current application
Power arm protection, over-heat protection, low-voltage protection and lost-signal protection
Secondary sub-menu setting by LCD program card or PC interface
Firmware updating by PC interface
Unique metal shape designing gives your new fashion visual impact.
Super smooth and accurate throttle linearity
Support and match with most of the motors, including high RPM motors
Programmable motor timing
Utilizes new smaller MOSFET technology to minimize weight
Finned heat sink
programmable throttle input range
Anti-spark circuit eliminates (HV OPTO version only)

Specifications
Output: Continuous Current 150A ,Burst Current 180A for 10 seconds
Battery : 18-38 NiXX / 6-12S LiPo
Weight: 120g
Size: 46x65x16.6mm (WxLxH)
No BEC

ZTW Gecko 150A High Voltage Aircraft ESC User Manual Free Download

DM800 HD SE V2
DM500 HD
VU+Solo2
VU+Solo Se V2
VU+Solo Pro V3
Mag254
HeroBox EX4
HeroBox EX3
HeroBox EX2
X Solo Mini 3
Zgemma Star H.2S
Zgemma Star H.2H
dreambox wholesale Store
Zgemma Star 2S
kerui alarm Store
Hikvision Store
Hikvision Ip camera
Headrest Monitor
Sunray box
kerui alarm
Andriod Headrest monitor
Reply

Use magic Report

49

!threads!

0

Friends

0

Money

Super Moderator

Rank: 8Rank: 8

VS-support1 Post time 2017-8-31 09:07:47 |Show all posts

Hello!
After updating for latest version (1.2.4.553) I was received problems. After 2-3 min all cameras turn off. Written - Disconnected. Sometimes written Relay mode.
I want backup to previous version. It was without this bugs. Where I can find previous version?

Dear Sir/Madam,
Thanks for your message,  On this upgrading firmware subject, the latest firmware has the advantage of good compatibility with APP, So it is no need to downgrade firmware
to previous version.  Please check your phone network speed and camera network environment, camera will works OK in APP.
For relay mode, I don't quite understand, please give me more detailed description.
Reply

Use magic Report

12
Return to forum Add thread
You have to log in before you can reply Login | Register

Archiver|Mobile version|网络摄像机|IP Camera|Network Camera|HD IP Camera|Eye4 Smart Cloud|网络摄像机|NVS|vstarcam ip camera bbs    

GMT+8, 2017-11-22 04:54 , Processed in 0.068504 second(s), 20 queries .

Powered by Discuz! X2.5

© 2001-2012 Comsenz Inc.

Top