Set as homepageCollectors site

VStarcam

 Retrieve Password
 Register
C16S-security-camera
!show!: 2334|Reply: 1

Vstarcam-c8833wip-x4 lost signal when temperature -5 °C

[Copy URL]

1

!threads!

0

Friends

0

Money

Newbie

Rank: 1

anmw Post time 2019-11-4 01:57:30 |Show all posts
Edited by anmw at 2019-11-4 02:27 \n\nHello, Vstarcam-c8833wip-x4, installed outdoor, work fine 6 month. It began to turn off after the onset of cold weather. (temperature -5 ° C). It works fine indoors, but turns off outdoors (some time work ~10min-1 hour). After rebooting the camera (turning the power supply off and on), the camera responds to the ping command (3-8 times) and does not work again (lost ping).
If I bring the camera into the home, then it works fine.
I tried to replace the power supply - same problem. Voltage - 12 volts (does not fall), replace network cable.
Firmware version: 66.63.204.104 (updated after a problem occurred). Please help me!

Ping: Outside and inside
Indoor.jpg
Outdoor.jpg

48

!threads!

0

Friends

0

Money

Super Moderator

Rank: 8Rank: 8

VS-support1 Post time 2019-11-5 16:01:39 |Show all posts
Dear Sir/Madam,
You are advised to reset camera first, delete if from APP, connect camera to wifi router with ethernet cable, and re-add it to APP again.

Reply

Use magic Report

You have to log in before you can reply Login | Register

网络摄像机|IP Camera|Network Camera|HD IP Camera|Eye4 Smart Cloud|NVR|VStarcam IP camera bbs    

GMT+8, 2024-3-28 22:21 , Processed in 0.062736 second(s), 31 queries .

Powered by Discuz! X2.5

© 2001-2012 Comsenz Inc.

Top