- regtime
- 2023-3-13
- last login
- 2023-3-14
- online
- 0 hour
- readperm
- 10
- credits
- 0
- posts
- 1
- digest
- 0
- UID
- 52764
|
Edited by romero at 2023-3-14 12:48 \n\n Edited by romero at 2023-3-14 12:48 \n\n Edited by romero at 2023-3-14 12:47 \n\n Edited by romero at 2023-3-14 12:46 \n\nIf you have forgotten the password for your NVR N800P device, you can reset it to its default settings to regain access. Here are the steps you can follow to reset the password:
Locate the reset button on your NVR device. It's usually located at the back of the device.
Press and hold the reset button for about 10 seconds.
Release the reset button and wait for the device to reboot.
Once the device has rebooted, use the default username and password to log in. The default username is usually "admin," and the default password is usually "123456" or blank.
Please note resetting the NVR device to its default settings will erase all the settings and configurations you had previously made. Therefore, you'll need to reconfigure the device .
DinarChronicles.com
|
|