Demo programs for T7838WIP

We have one of your T7838WIP webcams.
We have it working successfully, by typing our IP address into a Web Browser. The camera feed comes up on the web page, and we can use the controls to move the camera around.
We’ve also got the camera working wirelessly.

We would like to take the camera feed, and put it into our own HTML pages.
We can not get this working.
We have tried using the VB demo program, and the HTML demo program. We can’t get either of them working.

I think that we have entered in the values for these field correctly:

In the mean time we have made some progress and have the camera working using your view.html demo page. It only works though with szDevIP being the UID of the camera. If I try to put the IP address of the camera, it fails with an error message on the web page saying “Illegal Device”

As this camera will be in a different subnet on our network, we need to be able to connect to it via IP address and not the UID of the camera.

Hi

非常抱歉现在才回复你

I'm very sorry now back to you

你使用的T7838WIP摄像机现在可以正常使用

T7838WIP camera you're using now can be normal use

你是想用自己的HTML页面是吗

You want to use your HTML page is it

建议你打开http://cd.gocam.so/T_PnP_cn.html

I suggest you open the http://cd.gocam.so/T_PnP_cn.html

下载SDK开发包

Download the SDK development kit

获取对你有帮助

Get help for you

感谢你对vstarcam的支持

Thank you for your support to vstarcam

Architects https://onlinefreelancejobs.net/architecture-job/ design buildings and oversee the construction process from the planning stage to completion. They must also comply with codes and local building codes. They may be required to prepare environmental impact studies. The work of an architect can be very engaging and challenging.