✮Wireless connection | ||
✮Remote active wake-up | ||
✮Quick start, start recording within 400ms | ||
✮Intelligent detection of human movement, intelligent alarm push | ||
✮2000mAh battery, low battery warning | ||
✮Low power system optimization | ||
✮Free cloud storage to save alarm videos | ||
✮Removable bracket | ||
Sorts | Type | Parameters |
System | Operating system | Linux |
Online visitor | Supports 4 visitors at the same time | |
APP | O-KAM Pro | |
Collection | CPU | T23 |
Internal storage | 512Mb | |
Image sensor | GC2083, 1/3 CMOS (Pixel optional, PCB compatible) | |
Min. Illumination | 0.3~0.5Lux (color mode),0Lux (B&W mode) | |
Lens | Lens diameter 10mm,4G lens | |
Viewing angle | D135° | |
Video | Night vision | Black and white night vision, photosensitive automatic recognition of light switching, 8pcs 940nm non-luminous patch infrared light, irradiation distance 3~5 meters. |
Compression standard | H.264 /MJPEF/JPEG | |
Multi stream | Main stream: 1296P/15fps Sub stream: 360P/15fps | |
Bit rate | CBR/VBR two rate control modes, and the output rate range is 128~4096kbps | |
Image adjustment | Vertical, horizontal adjustable, OSD display | |
Audio | Input | Built-in-38dB microphone |
Output | Built-in 8Ω1W speaker | |
Sampling frequency/bit width | 8KHz/16bit | |
Compression standard/Bit Rate | G711A | |
AI | Humanoid detection | Humanoid detection, filtering invalid video contents |
Area detection | Free daub, only monitoring the areas concerned by users | |
Smart notification sound | Different devices push different sounds, so that you can know exactly which device is triggered | |
Intelligent alarm sound | Set different equipment alarm sounds according to different scenarios | |
More AI functions (testing) | Pets, vehicles, parcels, etc | |
Network | Network protocol | TCP/IP,HTTP,TCP,UDP,DHCP,DNS,NTP,RTSP,P2P,IPV4 |
Wireless network | IEEE802.11b/g/n | |
Wireless frequency | 2.4~2.4835GHz | |
Wireless security encryption | 64/128-bit WEP/WPA-PSK/WPA2-PSK data encryption | |
Connection | AP hotspot networking, Scan QR code to connect | |
Key | Key 1 | On/Off |
Key 2 | WIFI/DV mode swicthing | |
Reset key | Long press to restore the factory settings | |
Storage | External TF card | Support TF card (up to 256GB) |
Cloud storage | Free loop cloud storage | |
Alarm | Detection | PIR human detection |
Physical Indicators | Rated voltage | DC5V±5% |
Power supply | Built in 2000mAh | |
Power consumption | Sleep standby current 5mA, working: 400-600mA | |
Operating condition | Temperature: -10~55℃; Humidity: <90% | |
Weight | N.W :79.2g ; G.W. :216g | |
Size | 52×37×40mm(L x W x H) | |
Packing list | Camera*1, bracket*1, MICRO USB*1, manual*1 |