FG510

Detail Specs Videos
  • Support
  • VStarcam FG510
    ✮2 MP Ultra HD
    ✮AI function: supports open flame detection, smoke detection, fire point recognition, smoke and flame framing
    ✮Alarm voice prompt, area detection alarm, customized voice
    ✮F1.6 large aperture, clearer image
    ✮Soft light design, presenting a full color image in 24 hours
    ✮ISP image processing technology, preserving true colors
    ✮real time alerts
    ✮Remote access, view the monitoring areas anytime and anywhere
    Sorts Type Parameters
    Collection Operating system Linux
    Online visitor Supports 4 visitors at the same time
    APP O-KAM
    Collection CPU Ingenic T41
    Memory 1Gbit
    Lens 4mm /6mm F1.6 aperture
    Image sensor 1/3 CMOS sensor
    Minimum illumination 0.01Lux
    Sensor performance Support automatic white balance, automatic gain control and automatic backlight compensation
    Night Vision 4 warm lights, full color night vision
    Viewing angle 4mm- diagonal 92°, 6mm- diagonal 58.3°
    Video Resolution 1920*1080P/25FPS/2 MP
    Night Vision Full color night vision
    Compression standard H.265 /H.264 /MJPEF/JPEG
    IR control No IRCUT, full color night vision, automatically adjusting the brightness of the lights according to the environment
    Bit rate 128~4096kbps
    Image adjustment Brightness, contrast, OSD display
    Audio Input Built-in-38dB microphone
    Output Built-in 8Ω2W speaker
    Sampling frequency/bit width 8KHz/16bit
    Compression standard/Bit Rate G711A
    AI Smoke&fire detection Flame&smoke detection and framing, directly locate the fire point; Minimum pixel of flame: 30X30 pixels, lasting for more than 3 seconds; Recognizable flame colors: infrared, orange, yellow; Recognized smoke colors: gray white, gray black; Recommended installation height: 3 meters; Detection rate: 90%
    Alarm Camera: Alarm voice prompt; App: real time push of alarm messages.
    Alarm detection fire point detection, and smoke&fire detection.
    Area detection Free smear, only monitor the areas concerned by users
    Smart notification sound Different devices push different sounds, so that you can know exactly which device is triggered
    Intelligent alarm sound Set different equipment alarm sounds according to different scenarios
    Network Network interface 10Mbps/100Mbps adaptive/RJ45 interface
    Network protocol TCP/IP,HTTP,TCP,UDP,DHCP,DNS,NTP,RTSP,P2P etc.
    4G(China) FDD:B1/B3/B5/B8
    TDD:B34/B38/B39/B40/B41
    WCDMA:B1/B5/B8
    Storage External TF card Support TF card (up to 256GB)
    Cloud storage Support cloud storage
    Alarm Alarm detection Motion detection, siren sound, and area detection
    Physical Indicators External alarm interface Supports alarm input and output, RS485 modbus protocol
    Rated voltage DC12V±5%, supports standard POE 48v
    Power consumption Power: 7.7W (warm light on), maximum power: 8.8W
    Operating condition Temperature: -10~50℃; Humidity: <90%
    Weight (Note: in kind prevail)
    Packing list Camera, screw pack, allen wrench, warning sticker, screwdriver, manual