✮Wireless connection |
✮Remote active wake-up, two-way voice intercom, 180° rotation |
✮Quick start, start recording within 400ms |
✮Intelligent detection of human movement, alarm push, white light deterrance, customize alarm sound |
✮5200mAh battery power supply, low power warning |
✮It supports infrared night vision, color night vision, starlight night vision. |
✮Free cloud storage to alarm videos |
✮Support 5W solar panel, continuously power supply, and the camera won't not powered off |
✮Support sharing device with multiple family members |
✮Flexible installation |
Sorts |
Type |
Parameters |
System |
Operating system |
Linux |
Online visitor |
Supports 4 visitors at the same time |
APP |
O-KAM Pro |
Collection |
Processor |
T23 |
Memory |
512Mb |
Image sensor |
GC2083, 2MP,1/3CMOS |
Minimum illumination |
0.8Lux/F1.4(Color mode),0.3Lux/F1.4(B&W mode) |
Lens |
Focal length 2.8mm |
Sensor performance |
Support Automatic white balance, Automatic gain control, Automatic backlight compensation |
Viewing angle |
D144° |
Video |
Night vision |
It supports infrared night vision, color night vision, starlight night vision. Dual filters automatically switch, 2pcs 850nm infrared lights, night vision 5-10 meters |
Compression standard |
H.264 /MJPEF/JPEG |
Multi-stream |
Main stream:1296P/15fps Sub stream:360P/15fps |
IR control |
IR night vision enables; IR, ICR automatic detection; IR OFF night vision function disabled/ IR always OFF,ICR is fixed in the day vision mode |
Bit rate |
CBR / VBR two rate control modes, and the output rate range is 128~4096kbps |
Image adjustment |
Brightness, contrast, vertical, horizontal adjustable, OSD display |
Audio |
Input |
Built-in -38dB microphone |
Output |
Built-in 8Ω1W speaker |
Sampling frequency/bit width |
8KHz/16bit |
Compression standard / Bit rate |
G711A |
AI |
Humanoid detection |
Humanoid detection, filtering invalid alarms |
Area detection |
Free daub, only monitoring the areas concerned by users |
Smart notification sound |
Different devices push different sounds, so that you can know exactly which device is triggered |
Intelligent alarm sound |
Set different alarm sounds according to different scenarios |
More AI functions (testing) |
Pets, vehicles, parcels, etc |
Network |
Network protocol |
TCP/IP,HTTP,TCP,UDP,DHCP,DNS,NTP,RTSP,P2P,IPV4 |
Wireless network |
IEEE802.11b/g/n |
Wireless frequency |
2.4~2.4835GHz |
Wireless security encryption |
64/128-bit WEP/WPA-PSK/WPA2-PSK |
Connection |
AP hotspot network configuration, QR code network configuration, bluetooth network configuration |
Key |
Key 1 |
On/Off key |
Reset key |
Long press to restore factory settings |
Storage |
External TF card |
Support TF card (up to 256GB) |
Cloud storage |
Free cloud storage |
Alarm |
Alarm detection |
PIR human detection |
Physical Indicators |
Rated voltage |
DC5V±5% |
Power supply |
5200mAh battery power supply, 2*18650, supports 5V solar panel |
Consumption |
Sleep current 260uA, working: 230-360mA |
Operating condition |
Temperature: -10~55℃; Humidity: <90% |
Weight |
Gross weight: 270g |
Size |
114*66*55mm |
Packing list |
Camera*1 (including bracket), Pack of screws*1, manual*1, iron sheet*1, nail-free glue*1, auxiliary sticker*1 (type-C charging cable*1, solar panel*1, solar panel bracket*1 optional) |