| ✮Stable 4G connection | ||
| ✮Remote active wake-up, two-way audio | ||
| ✮Quick start, start recording within 400ms | ||
| ✮Intelligent detection of human movement, intelligent alarm push | ||
| ✮ Powered by an 8000mAh battery (optional 20000mAh), low battery reminder | ||
| ✮Low power system optimization | ||
| ✮Free cloud storage to save alarm videos | ||
| ✮Three-channel recordings | ||
| ✮The tracking camera can switch between long and short focus | ||
| Sorts | Type | Parameters |
| System | Operating system | Linux |
| Online visitor | Supports 4 visitors at the same time | |
| APP | O-KAM Pro | |
| Collection | CPU | T23 |
| Internal storage | 1Gbit | |
| Image sensor | OV 02N10 1/3CMOS | |
| Min. Illumination | 0.8Lux/F1.4(color mode), 0.3Lux/F1.4(B&W mode） | |
| Lens | Fixed camera: focal length 4mm+4mm，1G3P trackin camera：focal length 4mm(1G3P )+12mm（1G2P） | |
| Sensor performance | Support automatic white balance, automatic gain control and automatic backlight compensation | |
| Pan&tilt | Tracking camera adjust angle via the App, pan 270° tilt 90°, fixed camera adjust angle manually：horizontal180°, vertical 90° | |
| Viewing angle | D100° | |
| Video | Night vision | Full-color night vision, dual light source |
| Compression standard | H.264 /MJPEF/JPEG | |
| Multi stream | Main stream: 1080P/12fps Sub stream: 360P/10fps | |
| IR control | When the IR night vision function is enabled, IR and ICR are automatically detected; when the IR night vision function is disabled, IR is off and ICR is fixed in the day vision mode. | |
| Bit rate | CBR/VBR two rate control modes, and the output rate range is 128~4096kbps | |
| Image adjustment | Vertical, horizontal adjustable, OSD display | |
| Audio | Input | Built-in-38dB microphone |
| Output | Built-in 8Ω1W speaker | |
| Sampling frequency/bit width | 8KHz/16bit | |
| Compression standard/Bit Rate | G711A | |
| AI | Human detection | Human detection, filtering invalid video contents |
| Area detection | Free daub, only monitoring the areas concerned by users | |
| Smart notification sound | Different devices push different sounds, so that you can know exactly which device is triggered | |
| Intelligent alarm sound | Set different equipment alarm sounds according to different scenarios | |
| More AI functions (testing) | Pets, vehicles, parcels, etc | |
| Network | Network connection | Use APP to scan the QR code on device to add; Use the device to scan QR code on APP to add |
| Cat1 China | FDD:B1/B3/B5/B8 TDD:B34/B38/B39/B40/B41 | |
| Cat4 Overseas | European version/Japanese version/American version/Australian version | |
| Key/interface | Key 1 | On/Off key |
| Reset key | Long press to restore factory settings | |
| Storage | External TF card | Support TF card (up to 256GB) |
| Cloud storage | Free cloud storage | |
| Alarm | Sound light alarm | Sound and light alarm |
| Alarm detection | Support human detection, PIR detection range: 10 meters | |
| Physical Indicators | Rated voltage | DC5V/2.5A±5% |
| Power supply | Built-in 8000mAh battery, optional 20000mAh | |
| Consumption | Sleep standby 300uA, working: 350mA-1.8A max | |
| Operating condition | Working temperature: -10～55℃, working humidity <90% | |
| Weight | Net weight: 818g Gross weight: TBD | |
| Size | 183*235*180mm | |
| Packing list | Camera*1, TYPE-C*1, manual*1, solar panel*1, solar panel bracket*1 | |